i-Power
Through the effects of reduced electrical consumption, power economization, voltage and current stabilization; the usage of electrical power is maximized to achieve the dual objectives of saving money as well as prolonging the lifespan of the equipment. I-Power applies the principle of wave-filtering reactance to filter the harmonic wave and regulates the voltage to a practical range to provide high quality electrical supply for lighting and electrical devices, reduce ineffective electrical power, elevate power factor and thereby reduces electrical consumption.
Product specification
- Classification by voltages: single-phase 110V, 220V and tri-phase 380V, 440V; and high-voltage products
- Classification by electric current: can be customized for single-phase as well as tri-phase of 26A and above.
- Classification by operational functions: manual, standard, economic and timer-controlled.
- Classification by usages: indoors, outdoors (water-proof), and wall-mounted.
- Can be customized according to the actual needs of the user.
The Advantages of i-Power
1. Balancing of voltage and electric current:By applying the technique of electromagnetism balancing, it is able to regulate the voltage in the reactance to balance the operation of magnetic wave and electric current so as to balance of voltage in the wire. |
2. Regulate suitable voltage:
i-Power is able to regulate the operational voltage load of the various electrical equipments, i.e. supply a ±5% voltage rating to the operational voltage range, so that the load is able to operate within a suitable voltage range so as to save on electricity.
3. Eliminate the effect of harmonic wave:
The special material in i-Power is able to absorb the harmful harmonic wave that is generated during the delivery of electric current so that sine wave is unhindered and the lifespan of the equipment is thus prolonged.
4. Reduce electric current surges:
The reactance effect in i-Power is able to improve external electric current surge by 90 degrees and absorb ineffective electric power. Power factor is thus elevated and leading current phenomenon will not appear.
5. Resist electromagnetic interference:
Its reactance effect is also able to resist the impact of abnormal voltages and thus achieve the effect of protecting the equipment.
6. Prevent short circuits:
Due to i-Power’s ability to reduce ineffective electric current in the wire, it is thus able to reduce the load in the conductor. Overheating of wire or short circuits, are mainly caused by overloaded conductor. Therefore, reducing the electric current in the circuit reduces the possibility of short circuits.
7. Elevate the power factor of the equipment:
i-Power is also able to elevate the power factor. However, it is different from a capacitor in the sense that the latter is equipment for replacing reactive power whereas the former is able to directly absorb ineffective power. Therefore, power factor can be elevated. Once the power factor is elevated, the operational effectiveness of equipment will be improved.
8. Prolong the equipment’s lifespan:
i-Power is a type of setup that is able to provide practical electric power load and also eliminate harmful excessive voltage and electric current. Therefore, the equipment is able to operate under high quality electric current. Hence, prolonged lifespan is definite.
9. Elevate load capacity:
i-Power is able to elevate the load capacity by more than 15%. The output of the transformer and the circuit breaker is limited by the electric current. As i-Power is able to elevate power factor as well as reduce electric current, it has the residual electric power to supply to other equipment. Therefore, the same device is able to undertake more load.
10. Reduce the loss of circuitry:
i-Power is able to elevate power factor because part of the ineffective electric power in the circuitry has been absorbed by i-Power. The reduction of ineffective electric power in the circuit reduces the total voltage in the circuit. Loss of circuitry and total voltage in the circuit are directly related. A decrease in total voltage will definitely reduce circuitry loss.
11. Improve flickering situation:
A change in electric current load affects the voltage. It will cause flickers in lighting, fluorescent lamp, television. Equipment becomes damaged more easily. Flickers tire the eyes and may even hurt them. As i-Power regulates the voltage and the electric current, as well as stabilizes the equipment’s power, flickers that are caused by irregular voltage and electric current, are reduced.
A survey of 1000 listed American corporations conducted by an American authority in finance and economics magazines, revealed two startling findings: Electricity cost constitutes a third or a fourth of the total costs of a corporation. A corporation does not seem to be able to control its electrical expenses. This is a cost that is relatively large among all other expenses in a corporation. Sadly however, most of the corporations have not been able to control this cost effectively. Payment to the utility company will be in accordance with the amount stated in the bill as it seems uncontrollable and it is a must to pay up. Over time, these corporations have spent a huge sum on unjustified electrical expenses.
For the few corporations and users that have taken note to control electrical expenses, they have been brain-washed by the utility company, media as well as those who do not understand the laws pertaining to electricity. Many had the wrong notion that saving electricity is equivalent to stealing electricity. They wish to control the electrical expenses but do not dare to do so. The lack of legal knowledge is the main cause of wastages in electrical expenses in corporations and users. I-Power is a device that maximizes the use of electrical power and avoids wastages. It is able to provide the most practical power factor for all types of electrical devices and hence, reduce the cost of electricity. The device is installed at a legally allowed location and fully complied with the law on electricity.
User Guide
The Creation of i-POWER
Our modern living cannot be possible without the presence of electrical power. We need wide variety of electrical products to assist our normal day living to ease our life. For example, when you at home, you can get clean water hot and cold at a turn on your tap water, frozen food are meters away from you in the fridge, cooked rice and fried foods, clothes laundry and all handy devices you need to operate, are very dependent on electrical power. More than 80% of our daily needed electrical energy are generated by fossil (oil) burning power plants. And followed by charcoal burning is our secondary source of electrical energy generated from. So call new source of energy like nuclear power, wind power, water power, solar power etc, still not enough to cover 10% of current day power needed. And we all now, by another 100 years, we will be out of fossil energy supply, which mean, the limited resources will definitely increase our electrical bill in near future. We can feel that now, when we see highly increase electrical bill this month compare to years ago. Since we cannot live without this energy supply, we have to manage or improve efficiency on using energy to reduce cost we spend on everyday activities.
By doing so, we can enjoy same standard of living without giving up conveniences. And to do so, we need to understand a technical term, we call “Power Factor”. Nowadays, high tech countries like JAPAN and USA, European Nations, etc, they uses a lot of microchip in newly designed electrical devices so to use AI (Artificial Intelligent) to improve Power Factor of their new electrical products. This will not only save power consumption but at the same time reduce carbon emission for greener environment. But most of our Asian products made in development countries are not so high tech and other factory like selling price, production cost, infringement of patents, and lack of technical know-how etc. hold us back from making high efficient electrical products. Plus our consumers are not ready to know power management on electricity, so they make decision in getting new electrical products mainly by the appearance design and pricing, without knowing that, even they get the product at lower price, but in actual fact they will end up paying more as the Power Factor of the purchased item are really low. So they have to pay more money every time they use it. Averagely, more than 70% of current house hold appliances are built without power saver circuit, so with our newly design i-POWER, we use newest tech with computer chip and voltage-current phase adjustor, it can improve Power Factor of your house hold electrical devices to achieve power saving, , better energy efficiency and regulate supplied voltage, so to make your monthly electrical bill lower, prolong your electrical products life-span, and achieve better Power Factor for greener environment.
By doing so, we can enjoy same standard of living without giving up conveniences. And to do so, we need to understand a technical term, we call “Power Factor”. Nowadays, high tech countries like JAPAN and USA, European Nations, etc, they uses a lot of microchip in newly designed electrical devices so to use AI (Artificial Intelligent) to improve Power Factor of their new electrical products. This will not only save power consumption but at the same time reduce carbon emission for greener environment. But most of our Asian products made in development countries are not so high tech and other factory like selling price, production cost, infringement of patents, and lack of technical know-how etc. hold us back from making high efficient electrical products. Plus our consumers are not ready to know power management on electricity, so they make decision in getting new electrical products mainly by the appearance design and pricing, without knowing that, even they get the product at lower price, but in actual fact they will end up paying more as the Power Factor of the purchased item are really low. So they have to pay more money every time they use it. Averagely, more than 70% of current house hold appliances are built without power saver circuit, so with our newly design i-POWER, we use newest tech with computer chip and voltage-current phase adjustor, it can improve Power Factor of your house hold electrical devices to achieve power saving, , better energy efficiency and regulate supplied voltage, so to make your monthly electrical bill lower, prolong your electrical products life-span, and achieve better Power Factor for greener environment.
Before Using i-POWER
- This model of i-POWER is specially design for area that supplied voltage is range from 200V-240V. Please check and confirmed your area are in this voltage range. DO NOT use this model of i-POWER in 100-110V area.
- Try to use i-POWER with all other house hold electrical devices you have in one connected circuit. Like in Kitchen area, connect fridge, washing machine, lamps and lights, water heater etc in 1 circuit. But if your devices are too far apart, then you will need more than 1 unit of i-POWER to achieve good results.
- If you are not sure of what electrical devices are connected in 1 loop, you can use i-POWER at those power socket that connect to high consumption products like fridge, TV, air-cond, etc.
- Use extension wires if necessary, you can use one of the port on the extension for i-POWER and the rest for devices you need to improve Power Factor. But DO NOT overload the wire extension unit that you buy ! Check the maximum load bearable on the product before you use ! Also use only those with safety pass from your country authority. Our company will not be responsible on any damage or accident occurs due to the overloading of devices on extension wire ports you use.
- Japan ZEROMAX do 3 Quality Control check before shipping out each i-POWER to our valued customer. Each component was carefully checked, function of i-POWER, and the outer look of the i-POWER etc, too. So you can safely and comfortably use i-POWER when you received them.
- Check and make sure your house hold supply voltage is 200V-240V.
- i-POWER is designed by Japan ZEROMAX, so the outer look of the device is Japanese look and the power plug is also made to Japan specification. But the inner circuit has been specially redesign to suit 200-240V area, so we enclosed 2 pieces of special adaptor connectors in this export kit. Please ensure you use the right connector for your area. There is another adaptor that looks like twin-peaks, is for holding i-POWER on the vertical wall straight to avoid over stressed on i-POWER when installed. Stick this twin peak connector when you use i-POWER on vertical wall.
- After you have checked all connectors and apply them correctly, you can plug i-POWER into your house power socket.
- Turn on the Power Switch on the side of i-POWER, you will see the front LED glow, and it means i-POWER has started its function from that moment.
- This export model of i-POWER has this special LED indicator, which is specially design to work as a night assist lamp, so it will light up the path or corner where you install i-POWER. So you can plan and use i-POWER at the corner you need some cozy light in the night.
- i-POWER special LED light is made from low consumption super bright LED, so it consume almost no energy compare to what i-POWER is going to save you back. So enjoy this extra benefit without worrying your will have higher electrical bill.
i-Charge
Do you know how important is electrical voltage to your car performance and life-span? Many problems occurred in your car now are due to unstable voltage supply, and if your car is not taken care of ASAP, it will then worsen to serious problem later. Most of the car owners look for mechanics assistance when having problems with their cars from time to time. They are unable to find the right cause and remedy to the problems, and worst of all, car owners have to compromise to the problems most of the time. As we know "precaution is better then treatment", like we take good care of our body, we should take good care of our car before it is too late. Small spending in advance is definitely a wise investment, as it has very high cost/performance in returns.
Electrical systems in our cars are interconnected to each other. To get perfect performance you need a good and harmony electrical circuit environment. For example, if you have a old and less efficient ignition circuit in your car, you will have very poor fuel consumption, low throttle response, misfiring problem, jerking gear shift, all problems may occurred due to a single defect in another electrical problem. So to maintain optimum electrical performance in your car, we need to have a very stable voltage environment. Here comes a new electronic device - i-CHARGE, original patent/copyright from Japan, a multi-purpose Voltage Stabilizer with built in Battery Doctor System and Interference Reducer System. Once you use i-CHARGE, your car is in best control by this product, it will solve small problems that due to unstable voltage during driving. What is more wonderful, it is so easy to installed, with just a plug into cigar-lighter socket, will activate this device. Unlike other fuel saving product, by adding chemical and tablets into the fuel tank, increase the risk of car damages.
Electrical systems in our cars are interconnected to each other. To get perfect performance you need a good and harmony electrical circuit environment. For example, if you have a old and less efficient ignition circuit in your car, you will have very poor fuel consumption, low throttle response, misfiring problem, jerking gear shift, all problems may occurred due to a single defect in another electrical problem. So to maintain optimum electrical performance in your car, we need to have a very stable voltage environment. Here comes a new electronic device - i-CHARGE, original patent/copyright from Japan, a multi-purpose Voltage Stabilizer with built in Battery Doctor System and Interference Reducer System. Once you use i-CHARGE, your car is in best control by this product, it will solve small problems that due to unstable voltage during driving. What is more wonderful, it is so easy to installed, with just a plug into cigar-lighter socket, will activate this device. Unlike other fuel saving product, by adding chemical and tablets into the fuel tank, increase the risk of car damages.
Feature
i-CHARGE Voltage Stabilizer has the following three systems:
- Voltage Stabilizer System
- Interference Reducer System
- Battery Doctor System
Benefits
- Fuel saving
- Better RPM response
- Increase engine torque
- Engine power up
- Optimized all electronic devices in car
- Do not disassemble or modify this product to avoid damage or injury.
- Only design for 12V vehicles. Do not use on 24V vehicles.
- Do not plug in and out from the cigar-lighter socket during driving.
- When install, please make sure the plug of i-CHARGE is securely in contact with the socket.
- If the cigar-lighter socket is loosened due to previous usage of other charging device, please adjust the contact point inside the socket before plug in.
- Fuel saving effect will differ according to car type, driving behavior, weather, road condition etc.
- Faster throttle response, engine power up.
- Reduce car CPU noise signal, improve CPU reaction time, improve electronic efficiency.
- Smoother gear shift on automatic car.
- Improve engine power, better acceleration response, hence improve fuel saving.
- Maximize ignition efficiency, easier engine start.
- Prolong engine and electrical device life-span.
- Easy installation, totally DIY, the first choice for ladies drivers.
- Universal for all cars and motorcycles.
- Reduce noise with built in noise filter, improve sound system performance.
- Equipped with double fuse protection, for better product life and safety.
- Faster RPM response, it gives you powerful acceleration even when your car's air condition turn on to maximum load.
- Cleaner exhaust emission on HC and CO gas. So more environment friendly.
- Twelve (12) months Limited Product Warranty.
Engine Torque Test Comparison Table: Carbon Monoxide (CO) and Hydrocarbon (HC) Gas Release Comparison Table
Tips from the fuel saving expert
- Protect the environment, save and use fuel smartly now! As the global demand for oil rises, so will the domestic fuel price. It is unavoidable due to the rapid industrialization by many nations in the world that push the demand for fuel higher and higher by the day. Not only will it affect the livelihood of many people whose income are related closely to the consumption of fuel, but also many working class people as well. And their situation was compounded by non-existent or motionless wage rise due. We can only watch as the world race with each other for these products. But, to save ourselves and the environment, learn these tips here and become an expert fuel saver!
- Let’s Start Do not accelerate rapidly; accelerate gradually and gently. Accelerating your car rapidly will increase oil consumption 2 to 3 times higher than normal ignition. Give the engine a gradual acceleration. Sudden brakes or acceleration during driving too can increase fuel consumption by 30%! So, plan your trip ahead, a smooth journey gives you a pleasant drive all day long.
- Start & Drive Most modern cars nowadays are no longer using carburettors, warming your car engine up before driving, therefore is not needed. As you drive, the heat choker will warm the engine. So, it is advisable that you start to drive immediately after ignition as long as you as are not over speeding! After about 12 kilometres into your journey, the car will reach the correct operating temperature.
- Topping up the tank Problem with over filling. Over filling the vehicle fuel tank could be wasteful. It is like being forced to eat more food when you’re already full! Leakage and spillage could occur when your vehicle is hopping on uneven roads; it is very wasteful and hazardous to the environment.
- On the road Maintain a safe distance and avoid short sudden braking. Caution should be taken when driving behind another vehicle. Following too close and applying sudden braking will jerk your car forward, putting unnecessary pressure on the front tyres. When the vehicle pulls up to its normal position during low speed, the static start when you continue driving will caused the engine to consume more power in order to continue running!
- Attention Driver – You Don’t over speed! While the sensation and the rush of adrenaline is very much enjoyable, over speeding while you drive will sharply increase fuel consumption and increases your chance of causing a road accident whereby endangering yourself and other road users!
- Obstructing Objects There is in some instances, objects such as flags, unused canopy, carriers and many other kinds of equipment can be found on the roofs of vehicles. Unless you have the need to utilise it, take it off. These objects will increase the carrying burden on you car and therefore need more fuel power to operate the vehicle. It is also a speed hindrance to your vehicles.
- Avoid constant short braking Take caution that you do not constantly put your feet at the brake pedal as a rest pad. This will wear down the brake pads of your car and cause unnecessary pressure to the driver behind your vehicle!
- Under inflated tyres run steadily but higher fuel consumption Some vehicle owners would under-inflate their tyres so that they can enjoy a smoother drive. But, the truth is under-inflated tyres would increase fuel consumption because of less gripping power on the roads due to low pressure. And very often, large tyres with a large tread protector will not favour in fuel economy because these tyres requires a large gripping area and an expanded friction that becomes a burden on the engine to increase power. The huge consumption of fuel can be felt during constant short running and idling of the vehicle (e.g. traffic jams).
- Things you should know Park your car under the shades. Avoid parking your vehicle under direct sunlight because of high insulation. Open the doors to let in cooler air to ventilate your car interior. Avoid driving under hot condition because the air conditioning system will take a much longer time to release cool air flow and this will cause higher fuel consumption.
- Do not neglect your vehicle maintenance Maintenance should be carried out after every 5000 or 10000 kilometres. Periodical checks on the depot, oil filter, transmission fluid, batteries, tyres, CV joints and etc. will help you to maintain optimum condition for your vehicle. Tyre pressure should be checked for the correct pressure as a properly inflated tyre can give your vehicle a 3.3 percent extra mileage. Under-inflated tyres consume more fuel; periodical pressure checks will not only give you extra driving protection but also better fuel management because every cubic pressure is equal to 0.4 percent increase in fuel consumption. But caution should be taken too as to not over-inflate the tyres. As over-inflated tyres would swell pressure inside the tyre and the heat could cause tyre leakage and breakage.
- Cleaning the spark plugs Carbon would build up in the engine and around the spark plugs area significantly during idling position in traffic jams. This built up deposits would lower combustion efficiency, thus will make the engine use more fuel to start or ignite. Clean spark plugs would ignite and burn fuel correctly in the initial ignition and helps to avoid wastage of precious fuel.
- Use less electrical appliances All air conditioning, headlights, alarm system, stroboscope and etc. draw energy from the car generator which in turn draws energy from the engine that burns fuel! So, any other electrical appliances like charger, LCD monitor, shaver, expanded alarm or sound system would burden the generator. When more energy is needed, the generator would extract more pressure to timing belts to produce more energy and this will certainly increase fuel consumption.
- Don’t burden vehicle with unnecessary weight Don’t burden your vehicle with heavy objects that don’t belong in it. Things such as a heavy toolbox, metals, scraps and etc. should be taken out. Every 40 – 50 kilograms of excess weight is equal to carrying another passenger. This will in turn translate into 2 – 3 percent higher fuel consumption.
- Over modification won’t save fuel! There are a lot vehicle modification shops who advise vehicle owners to change the catalyst converter. However, this kind of modification would only pressure the exhaust pipe to deliver more power; some oversized exhaust system would need more fuel for this purpose. It is really a waste of money and fuel and is unnecessary!
